4 Cue Ignition System - Remote not included

4 cue remote firing system.  Remote sold separately.

Our 4 cue firing units are the most versatile and easy to use units that can be spread out and used all over a field instead of using long wires and leads.

You can use up to 6 units with 1 remote controller (24 cues)  so it could easily be spread out with total 24 cues. You can start out with one and expand it later on if you like.

One controller will fire all 6 units 2 remotes will control 12 units etc etc.

Once units are programmed using the programming instructions, batteries are put in the units and turned on and turned to fire you will see how they work. Make sure controller is turned on and antenna is up also. For instance if you were to use three units at once you hold the A button while pushing ALL, SEQUENCE or STEP you will see that if you hold the A button then press the ALL button all channels will fire at once on the A unit. If you hold the A button and press the SEQ button it will fire 1, 2 3 and 4 in sequence. If you hold the A button and press STEP button it will only fire each channel in sequence as you continue to hold the A button and push the STEP button. You can for instance Hold the A button and press sequence once and fire only the first channel on the A receiver then hold the C button and push ALL button and fire off all the channels on C then go back to A and hold the A button and press STEP button again to fire channel two than go to Receiver B and also step through each and every channel and move back and forth between receivers in any fashion you chose.